La 824F bénéficie du nouveau design de la série F et est propulsée par le moteur Weichai WD12 T2, développant une puissance brute maximale de 185 kW (248 ch).
Cette machine est équipée d'une transmission hydrostatique à commande électronique, optimisant la productivité et la maniabilité. Elle propose différentes largeurs de chenilles, de 560 mm à 915 mm, ainsi qu'un large choix de lames : SU, S, U, pour la gestion des déchets et forestières. Parmi les équipements arrière disponibles, on trouve un ripper multident, un ripper monodent et un treuil, afin de répondre aux besoins variés des clients.
| Model | ||||||
|---|---|---|---|---|---|---|
| Model | 824F | 824F LGP | 824F CH | 824F DS | 824F WH | 824F FR |
| Main Specifications | ||||||
| Operating Weight | 23,730kg | 27,660kg | 24,550kg | 26,920kg | 28,350kg | 25,480/28,365/28,440kg |
| Ground Pressure | 63kPa | 38kPa | 54kPa | 37kPa | 39kPa | 67/63/63kPa |
| Ground Clearance | 400mm | |||||
| Max. Slope | 30° | |||||
| Engine | ||||||
| Engine Model | WD12G250E202 | |||||
| Gross Power (ISO 14396) | 185kW / 248hp | |||||
| Rated Speed | 2,100r/min | |||||
| Powertrain | ||||||
| Type | Dual-path, closed loop electronically controlled hydrostatic drive system | |||||
| Travel Speed-F/R | Infinitely variable speeds 0-10 km/h | |||||
| Steering & Brake | Hydrostatic steering; wet, multi-disc brake, Bellville spring actuated and hydraulically released | |||||
| Blades | ||||||
| Blade Type | SU/S | S-LGP | U/Coal | S-LGP | S-WH | SU-FR/S/A |
| Blade Capacity (ISO 9246) | 6.4/5.8m³ | 5.5m³ | 7.5/9.2m³ | 5.5m³ | 12.7m³ | 8.6/5.8/3.9m³ |
| Blade Width (w/End Bit) | 3,605/3,700mm | 4,400mm | 3,820mm | 4,400mm | 4,400mm | 3,605/3,700/4,365mm |
| Blade Height | 1,510mm | 1,350mm | 1,420/1,620mm | 1,350mm | 1,945mm | 1,830/1,510/1,105mm |
| Max. Blade Lift Ground Clearance | 1,140mm | 1,165mm | 1,140mm | 1,165mm | 1,165mm | 1,140/1,140/1,175mm |
| Max. Blade Digging Depth | 570mm | 665mm | 570mm | 665mm | 665mm | 570/570/550mm |
| Blade Tilt Height (Middle Hole) | 520/540mm | 640mm | 550mm | 640mm | 640mm | 520/540mm |
| Blade Weight (w/o Push Arm) | 1,760/1,645kg | 1,930kg | 2,100/2,300kg | 1,930kg | 2,300kg | 1,870/1,645/1,307kg |
| Minimum Turning Radius | 4,215mm | 4,300mm | 4,500mm | 4,300mm | 4,300mm | 4,215/4,075mm |
| Undercarriage | ||||||
| Track Shoe Width | 560mm | 910mm 915mm | 660mm | 915mm 910mm | 915mm | 560mm 660mm |
| Track Shoe Quantity (Each side) | 40 | 45 | 40 | 45 | 45 | 40 |
| Track Roller Quantity (Each side) | 7 | 8 | 7 | 8 | 8 | 7 |
| Carrier Roller Quantity (Each side) | 2 | 2 | 2 | 2 | 2 | 2 |
| Hydraulic System | ||||||
| Type | Gear Pump, Pilot control | |||||
| Implement Hydraulic System Pressure | 19MPa | |||||
| Multi Shank Ripper | ||||||
| Type | Parallelogram | / | / | Parallelogram | / | Parallelogram |
| Max. Penetration (Top hole) | 860mm | / | / | 860mm | / | 860mm |
| Max. Clearance Under Tip (Bottom hole) | 640mm | / | / | 640mm | / | 640mm |
| Weight | 2,445kg | / | / | 2,445kg | / | 2,445kg |
| Single Shank Ripper | ||||||
| Type | Parallelogram | / | / | Parallelogram | / | Parallelogram |
| Max. Penetration (Top hole) | 737mm | / | / | 737mm | / | 737mm |
| Max. Clearance Under Tip (Bottom hole) | 742mm | / | / | 742mm | / | 742mm |
| Weight | 2,320kg | / | / | 2,320kg | / | 2,320kg |
